Hi all,
Im getting the windows driver certification on win 7 x32/x64 bit for the
serial driver.
Im getting all the “Run Test” failed for all the Fuzz test without BSOD and
im not able to get the trace where it failed also.
Im using the wdk 6000 source code of pnp0501 code and i dont have the
original source code and is it possible to get the wdk 6000 source, my
driver uses the old code and this code , i have added the fix , it passed
the HLK for win 10 , same code when i use it for win 7 certification all
the fuzz test were failed.
Sleep and PNP with IO test was failed with “WDTF_SYSTEM : To Hibernate the
system with SetSuspendState(…) failed : 50” and i have insatlled graphics
driver and run the powercfg /h on and check the
“C:\Users\administrator.LOGOCERT>powercfg
/a
The following sleep states are available on this system: Standby ( S1 )
Hibernat
e
The following sleep states are not available on this system:
Standby (S2)
The system firmware does not support this standby state.
Standby (S3)
The system firmware does not support this standby state.
Hybrid Sleep”
Restart the machine and it doesnt pass the test.
Im able to get pass the whck for wdk 7600.16385.1 where i have added my fix
and able to pass the certification.
There is no logs for fuzz test to identfiy why it failed.
Could you please anyone help on this issue.
Regards,
PRabhakar V