[MKTG]: Re: [MKTG]: Re: [MKTG]: Re: HLK for UCSI on windows 10 - regarding

@ tim pls check in this link

https://social.msdn.microsoft.com/Forums/en-US/b10c2951-1f36-43c9-83ec-8e00245ca597/hlk-setup-for-partner-system-for-usb-type-c-connectionregarding?forum=whck

On Tue, Mar 28, 2017 at 10:12 PM, Prabhakar V wrote:

> @tim could you please check in this link where vidya pointing out that you
> can see the script running on both ucsi capable sysyem(SUT and partner)
>
> On Tue, Mar 28, 2017 at 10:01 PM, Tim Roberts wrote:
>
>> Prabhakar V wrote:
>> >
>> > Question:
>> >
>> > 1)When the HLK server running the test case for UCSI where I can’t see
>> > the script running in UCSI_2 capable system(Partner system I have
>> > entered the machine name in HLK server when it encounters the pop
>> > message for asking the partner machine name ) which is connected to J2
>> > of MUTT device whereas I can see the script running on UCSI_1 (SUT
>> > )capable system ?
>> >
>> > 2) whether the UCSI script should run on both UCSI_1 and UCSI_2
>> > capable system or not ? if not it’s a correct behavior ?
>> >
>> > Could you please provide your inputs for the above query.
>> >
>>
>> If the tests are passing, then clearly the HLK is getting what it needs
>> from the partner system. It doesn’t matter what you see on the partner
>> system.
>>
>> –
>> Tim Roberts, xxxxx@probo.com
>> Providenza & Boekelheide, Inc.
>>
>>
>> —
>> NTDEV is sponsored by OSR
>>
>> Visit the list online at: http:>> lists.cfm?list=ntdev>
>>
>> MONTHLY seminars on crash dump analysis, WDF, Windows internals and
>> software drivers!
>> Details at http:
>>
>> To unsubscribe, visit the List Server section of OSR Online at <
>> http://www.osronline.com/page.cfm?name=ListServer&gt;
>>
>
> — NTDEV is sponsored by OSR Visit the list online at: MONTHLY seminars
> on crash dump analysis, WDF, Windows internals and software drivers!
> Details at To unsubscribe, visit the List Server section of OSR Online at
></http:></http:>

Prabhakar V wrote:

@tim could you please check in this link where vidya pointing out that
you can see the script running on both ucsi capable sysyem(SUT and
partner)

Look, I’ve never done this. All I’m doing is reading the instructions,
like you are. Are you able to ping the partner system from both the SUT
and the server? Did you install the “Test UCSI” driver on both systems?

Are you able to run HLK tests? Are the tests passing?


Tim Roberts, xxxxx@probo.com
Providenza & Boekelheide, Inc.