HLK test setup for USB Type C device

NTDEV
1

Hi all,

Please help on what are the required setup for USB Type C device to be ceritied for windows 10 machine.

Is minimum hardware of MUTT is sufficient to pass all the test cases which is govern by USB Type C port to be pass or other device to be connect it to other port of USB type c device which is act as a client machne to HCK controller.

Please help on this.

What is the hardware setup for HLK test for USB Type C device for windows 10 ?

Could you please suggest me the setup required for HCK test in windows 8 machine ?

Please guide me the exact hardware requirement were handled for windows 8 machine for USB type C device to pass the certification.

Regards,
Prabhakar Vinayagam

2

Hi all,

Is any one help on this issue ?

Regards,
Prabhakar Vinayagam

3

Hi all,

What is the hardware requirement to pass the HCK or HLK test cases for USB Type C device for Windows 8 or 10.

Please provide the exact requirement.

Regards,
Prabhakar Vinayagam

4

Pls guide me what is the exact hardware setup for USB Type C to be certified in windows 10 machine to pass the HLK test.

5

On Jan 17, 2017, at 3:41 AM, xxxxx@gmail.com wrote:

Please help on what are the required setup for USB Type C device to be ceritied for windows 10 machine.

Is minimum hardware of MUTT is sufficient to pass all the test cases which is govern by USB Type C port to be pass or other device to be connect it to other port of USB type c device which is act as a client machne to HCK controller.

Please help on this.

What is the hardware setup for HLK test for USB Type C device for windows 10 ?

Could you please suggest me the setup required for HCK test in windows 8 machine ?

Please guide me the exact hardware requirement were handled for windows 8 machine for USB type C device to pass the certification.

The WHQL guidelines are usually pretty clear. Have you gone through those? Have you contacted the WHQL support folks? They are quite responsive.
—
Tim Roberts, xxxxx@probo.com
Providenza & Boekelheide, Inc.

6

@Tim, " They are quite responsive" unlesss you get vijay… :slight_smile:

7

Could you please guide me how i can contact WHQL folks ?

On Wed, Jan 18, 2017 at 2:19 PM, wrote:

> @Tim, " They are quite responsive" unlesss you get vijay… :slight_smile:
>
> —
> NTDEV is sponsored by OSR
>
> Visit the list online at: http:> showlists.cfm?list=ntdev>
>
> MONTHLY seminars on crash dump analysis, WDF, Windows internals and
> software drivers!
> Details at http:
>
> To unsubscribe, visit the List Server section of OSR Online at <
> http://www.osronline.com/page.cfm?name=ListServer&gt;
></http:></http:>

8

Wat are the requirements for hardware setup for USB type c to be certified
in windows 10 machine
On 18 Jan 2017 3:38 p.m., “Prabhakar V” wrote:

> Could you please guide me how i can contact WHQL folks ?
>
> On Wed, Jan 18, 2017 at 2:19 PM, wrote:
>
>> @Tim, " They are quite responsive" unlesss you get vijay… :slight_smile:
>>
>> —
>> NTDEV is sponsored by OSR
>>
>> Visit the list online at: http:>> lists.cfm?list=ntdev>
>>
>> MONTHLY seminars on crash dump analysis, WDF, Windows internals and
>> software drivers!
>> Details at http:
>>
>> To unsubscribe, visit the List Server section of OSR Online at <
>> http://www.osronline.com/page.cfm?name=ListServer&gt;
>>
>
></http:></http:>

9

Prabhakar V wrote:

Could you please guide me how i can contact WHQL folks ?

Well, where did you download the HLK and the testing guidelines? Do you
have a WHQL account? If you go to the WHQL web site at
sysdev.microsoft.com, you’ll see a “SUPPORT” link at the bottom. That
page has a link for “Support for Windows HCK 8.1”.

–
Tim Roberts, xxxxx@probo.com
Providenza & Boekelheide, Inc.

10

Prabhakar V wrote:

Pls help on this.

You should keep this on the mailing list so others benefit.

Without using mutt device how I can run the hlk test case to validate
the certification for USB type c device ?

Remember that USB Type C is just a connector. It’s not a type of
device. You have a USB 3 device.

You have to decide exactly what you want to do. Are you looking to get
USB certification for your device? Do you want the Windows logo for
your device? Are you just looking to do more extensive testing? Those
all have different answers.

If you want USB certification, so you can put the USB logo on the box,
then you have to go to the USB Implementor’s Forum (usb.org) and read
about their procedures. Commonly, you will submit your device to a
testing laboratory, which will do the requisite tests and return the
results to you.

If you want to get the Windows logo, then there are two steps. You have
to download the USB3CV testing tool from the USB Forum,
http://www.usb.org/developers/tools , and run it on your device. After
that, you can run the HLK tests, which test the driver. The HLK can
read the USB3CV logs to verify that you passed the USB command tests.

The MUTT device is only needed if you want to do more extensive testing
of your device, such as the Type-C interoperability tests.

How I can get help from whql support… Could u please give me the ID…

I did tell you. Look, this is a complicated topic, involving several
different organizations. You have a lot of research to do.

–
Tim Roberts, xxxxx@probo.com
Providenza & Boekelheide, Inc.